Solenoid valve does not act for you
In the process of using the solenoid valve, have you ever encountered the situation that the solenoid valve does not work? When this happens again, everyone knows what caused it? Today, I will tell you about the reason why the solenoid valve does not work. If the solenoid valve does not work, you can check according to the following points:
1. Solenoid valve terminals are loose or the wire ends are off.
2. Solenoid valve coil burnout.
3. Solenoid valve stuck. The sliding valve sleeve of the solenoid valve has a small clearance gap with the valve core, and is generally assembled in a single room. When mechanical impurities are introduced into the lubricating oil too little, it is easy to get stuck.
4. Air leaks. Air leakage can cause insufficient air pressure, making it difficult to open and close the forced valve.
After reading Xiaobian, so much, if you use the solenoid valve in the future, if the solenoid valve does not work , can be judged based on the above content.
Source (Solenoid Valves) www.zograjd.com
