ZGQS-60-23P non-contact underspeed switch

The underspeed switch is a simple and universal monitoring device for economical, reliable, shaft speed and other rotating devices. When the current speed signal is detected to be lower or higher than the normal speed range, the switch outputs two sets of switching signals for alarm. Or stop. No moving parts, no wear, long safety life, integrated structure, centralized control, simple setting or troubleshooting. The housing is waterproof and dust-proof. The two-bolt fixed housing can be directly installed in harsh environments.

 First, technical parameters

      Power supply voltage: AC220V Detection range: 0.5m/s to 9.99m/s

      Pulse: 6 ~ 120Hz speed: 0 ~ 999 rev / min

      Boot delay: 10 seconds Switch and target distance: 10 ~ 20mm

      Number of switches: 1 group normally open 1 group normally closed

      Contact capacity: 24 ~ 380V AC / DC current 1A

     Detection indicator: When the speed range is within the set range, the relay output, the LED is bright to help detect the sensor or check the wiring failure.

 The non-contact under-speed switch is a low-cost, high-reliability, simple and versatile inspection device for shaft speeds and other rotating devices. It is placed in a weatherproof, sealed, corrosion-resistant enclosure that allows exposure to harsh environments.

       Second, its advantages are:
     1) Non-contact proximity detector, long service life and low maintenance cost;
     2) Two bolts are fixed to ensure easy installation;
     3) Integrated structure, centralized control device, setting or troubleshooting;
     4) No moving parts, no wear, long life and long life

    Can replace Ramsey 60-23P type underspeed switch

     Third, the external dimensions:

      四、Panel operation instructions：