There are closed chambers in the solenoid valve. There are through holes in different positions. Each hole is connected with different oil pipes. The middle part of the cavity is a piston. On both sides are two electromagnets. Which side of the magnet coil is energized? side
The Audible and visual alarm is also called the sound and light alarm to meet the special requirements of the customer for the alarm loudness and installation position. Simultaneously emit two kinds of warning signals, sound and light.
The slide indicator light is also called the slide line indicator light--main features and advantages: The light source adopts imported ultra-high brightness LED, low power consumption and long working life.
PC200-8 uses EFI engine, and its user code is quite different from PC200-6/7. PC200-8 user code
The level switch is mainly used for measuring the high and low level of the container and the tank, or the intermediate level measurement. It is installed on the top, side and bottom of the silo by thread or flange, including the rotary level switch and tuning fork. Material level switch, capacitive level switch, RF admittance level switch, etc., material level switch details can click on the term reference material Thank you!
The limit switch is an electrical switch used to define the limit position of the motion of the mechanical device. Limit switches are available in contact and non-contact. The contact type is relatively intuitive, on the moving parts of the mechanical equipment, the upper limit switch is installed, the stop position of the fixed position is fixed at the opposite point of movement, or the opposite installation position
