ZGDH-F-II intelligent slip switch
The switch is a simple and universal monitoring device for economical, reliable, shaft speed and other rotating devices. When detecting that the current speed signal is lower or higher than the normal speed range, the switch outputs a set of switching signals for alarm or Stop. No moving parts, no wear, long safety life, integrated structure, centralized control, simple setting or troubleshooting. The housing is waterproof and dust-proof. The two-bolt fixed housing can be directly installed in harsh environments.
First, technical parameters:
Power supply voltage: AC220V Detection range: 0.5m/s to 9.99m/s
Pulse: 6 ~ 120Hz speed: 0 ~ 999 rev / min
Boot delay: 0-60 seconds adjustable (factory setting 10 seconds) Switch to target distance: 10 ~ 20mm
Action delay: 0-60 seconds adjustable (factory setting 001 seconds)
Number of switches: 1 group normally open 1 group normally closed
Contact capacity: 24 ~ 380V AC / DC current 1A
Detection indicator: When the speed range is within the set range, the relay output, the LED is bright to help detect the sensor or check the wiring failure.
Second, the external dimensions:
Third, the installation diagram:
Fourth, the panel operation instructions:
