Product Description:

The anti-bias switch is used for belt deviation detection to be fixed at the top or bottom of the conveyor stringer, usually at the ends of the belt from the head or tail drum 0.3 ~ 2 meters place. After the belt runs off, the action arm is forced to deviate and the alarm micro switch is activated. If you continue to deviate from the stop contact and touch another set of contacts, the conveyor will stop mechanically.

Application:

●Conventional Belt Conveyor       ●Underground Cableway Support Belt Conveyor      ●Ship Loading and Unloading System          

●Stacking and Reclaiming Conveyor       ● Tilting and Shuttle Conveyor                ● Crane excavator boom limit

●Sleeve Feeder Conveyor     ●Heavy Limit Switch

Special Options:
●Stainless steel cover screws       ●Stainless steel action bars and stainless steel vertical rolls
●Optional mounting brackets       ●Can increase the number of switch points

Installation Instructions:

Universal mounting design allows the anti-bias switch to be mounted freely on the top or bottom of the conveyor stringer
2) Rugged cast aluminum housing, standard NEMA4 protection, special surface treatment for special environments
3) The integral cover is easy to connect, the switch is easy to adjust, and the cover can be removed without removing the action bar. Br /> 4) The action rod bearing is rated at 5000 rpm, and the belt speed is up to 6.35 m/s
5) The normal angle of the action lever is 22.5°
6) When the normal angle is 10 degrees, the alarm contact will act. When the normal angle is 20 degrees, the stop contact will act.

Dimensions: